AC Charging Assembly & Testing Training System
Model: BT-NEV2-T040
A practical station for AC charging component assembly, wiring checks, protection-device inspection and guided electrical fault diagnosis.
- Charging Unit Power
- ≤1.5 kW
- Charging Current
- ≤7 A
- Control-Board Input
- 12 V DC
- Workstation dimensions
- ≥1,630 × 780 × 1,730 mm (L × W × H)
On This Page Overview
Product Overview
A practical station for AC charging component assembly, wiring checks, protection-device inspection and guided electrical fault diagnosis.
Core Functions
The system connects AC charging principles with practical inspection and diagnostic tasks. Learners can follow the charging-control sequence, use the available test points and instruments, and document evidence for instructor review.
Practical Training Tasks
- AC charging pile test
- L1 fault diagnosis and service inspection
- General fault diagnosis and service inspection
- PE fault diagnosis and service inspection
- CC fault diagnosis and service inspection
- CP fault diagnosis and service inspection
- Fault diagnosis on detection circuit 1
- R4 fault diagnosis and service inspection
- Charging-control test
- Complete-vehicle charging-control test
- System test
- AC charging operating test
- Operating-procedure test
- Charging-control fault diagnosis and service inspection
- AC charging fault diagnosis and service inspection
- Charging-system fault diagnosis and service inspection
Equipment and Instruments
AC charging pile metal bench frame
AC charging pile
Fault box
Teaching display
Insulated-tool and test-instrument practice
Technical Specifications
Values apply to the charging unit and named components. The control board's 12 V DC input is not the complete workstation's mains supply.
The following values define the verified configuration. Symbols such as ≥, ≤ and < retain their specified meaning.
| Workstation dimensions | ≥1,630 × 780 × 1,730 mm (L × W × H) |
|---|---|
| Charging-unit dimensions | 900 × 360 × 200 mm (L × W × H) |
| Charging-unit power | ≤1.5 kW |
| Charging current | ≤7 A |
| Control-board input voltage | 12 V DC |
| Teaching-display size | ≤55 in |
| Insulated-tool voltage rating | 1 kV |
| Insulation-resistance measurement | 2,000 MΩ |
| Insulation tester DC-voltage range | 0 to ±1,000 V DC |
| Insulation tester AC-voltage range | 30–750 V AC |
| Insulation tester short-circuit current | Approx. 1.3 mA |
| Insulation tester weight | Approx. 600 g |
| Ground-resistance measurement range | 0–2,000 Ω |
| Ground-voltage measurement range | 0–200 V |
| Multimeter voltage range | 400 mV–1,000 V |
| Multimeter current range | 400 μA–10 A |
| Multimeter resistance range | 400 Ω–40 MΩ |
| Multimeter frequency range | 9.999 Hz–9.999 MHz |
| Maximum software resolution | 1,920 × 1,080 px |
| Scenario-introduction animation | ≥15 s |
Configuration and Ordering
Reference Laboratory Quantity
1 unit
This quantity belongs to the reference laboratory equipment schedule. Confirm the quantity for your project in the quotation.
Configuration and Procurement
Confirm the final accessories, software version, interface language, room conditions and installation responsibilities in the signed technical schedule. The quotation should also identify any external vehicle, charging interface or electrical infrastructure required for the planned tasks.
Details for Your Inquiry
Share the learner level, class size, required charging tasks and destination electrical conditions so the equipment, software, delivery scope and applicable safety procedures can be defined for the project.
Product Questions
Which charging tasks can learners practise?
The configured scope covers AC charging operation, control checks and guided diagnosis of the documented L1, PE, CC, CP and related detection circuits.
Is a complete vehicle included?
The training system is centred on the charging workstation. Any vehicle, external charging interface or additional infrastructure required for complete-vehicle exercises should be listed separately in the quotation.
What should be confirmed before installation?
Confirm the destination electrical supply, room layout, workstation access, software language, teaching-resource package and responsibilities for installation and commissioning.
Continue Exploring
Related Products
Compare the stated teaching roles below. Product connections, included accessories and software licenses are confirmed in the selected configuration.
