Drive Motor Performance Test & Analysis Platform
Model: BT-NEV2-T076
A motor dynamometer teaching station for controlled load tests, speed and torque measurement, and performance-curve analysis.
- Test Motor
- 80 V DC PMSM
- Speed Accuracy
- ±0.1% FS
- Torque Accuracy
- ±0.2% FS
- Workstation dimensions
- ≥1,630 × 780 × 1,730 mm (L × W × H)
On This Page Overview
Product Overview
A motor dynamometer teaching station for controlled load tests, speed and torque measurement, and performance-curve analysis.
Core Functions
The platform connects motor-control principles with repeatable test procedures and measured results. Learners can prepare a test, observe operating data and compare performance under instructor-defined conditions.
Practical Training Tasks
- Learners carry out controlled drive-motor tests and review the motor response
- Controlled performance test
- Drive-motor test bench operation
- Intelligent testing and analysis functions
- Fault-box practice
- MAP test and analysis
- New-energy vehicle drive-motor performance testing and analysis
- Safety-protection practice
- High-voltage safety-protection procedures
- Drive-motor performance test
- Drive-motor fault diagnosis and service inspection
Dynamometer and Supporting Equipment
Drive-motor test bench frame
Permanent-magnet synchronous motor
Test system
AC/DC power supply
Control unit
Teaching display
Fault box
Technical Specifications
The component ratings below do not define a combined safe test envelope. Confirm the matched motor, drives, dynamometer, power supply, cooling and permitted test schedule before planning installation or powered exercises.
The following values define the verified configuration. Symbols such as ≥, ≤ and < retain their specified meaning.
| Workstation dimensions | ≥1,630 × 780 × 1,730 mm (L × W × H) |
|---|---|
| Test-equipment rated power | ≥11 kW |
| Working supply | 380 V AC ±15%, three-phase five-wire; 50 Hz ±5 Hz |
| AC motor-driver rated power | ≥11 kW |
| AC motor-driver rated current | 25 A |
| AC motor-driver peak current | 29 A |
| PMSM driver rated voltage | 80 V DC |
| AC/DC supply rated voltage | ≥100 V |
| AC/DC supply rated current | ≥150 A |
| PMSM duty | S1 |
| Speed measurement accuracy | ±0.1% FS |
| Torque measurement accuracy | ±0.2% FS |
| Torque resolution | 0.01 N·m |
| Speed resolution | 0.1 r/min |
| System data-update cycle | 20 ms |
| Dynamometer supply | 220 V AC, 50 Hz |
| Dynamometer operating environment | 0–40 °C |
| Rated speed | ≥2,000 r/min |
| Maximum speed | ≥4,000 r/min |
| Rated torque | ≥30 N·m |
| Torque range | ≥50 N·m |
| Operating system | Windows |
| Teaching-display size | 55 in |
| Memory configuration | 8 GB + 512 GB |
| Processor | i5 |
| Controller processing | Up to 168 MHz with floating-point DSP instructions and pulse detection |
| Control-board construction | MCU functional zoning; 4-layer high-density PCB |
Configuration and Ordering
Reference Laboratory Quantity
1 unit
This quantity belongs to the reference laboratory equipment schedule. Confirm the quantity for your project in the quotation.
Configuration and Procurement
Confirm the final motor, dynamometer, power cabinet, instrumentation, software version, guarding, room services and installation responsibilities in the signed technical schedule. The destination electrical supply and safety provisions should be reviewed before ordering.
Details for Your Inquiry
Share the learner level, class size, planned motor tests and destination electrical conditions so the test range, equipment scope, software and applicable safety procedures can be defined for the project.
Product Questions
What can learners measure on the platform?
The verified configuration supports controlled speed and torque testing, data review and instructor-led comparison of motor behavior within the specified operating range.
Does the platform replace an assembly trainer?
No. This platform is intended for controlled performance testing and analysis. Motor disassembly, reassembly and component inspection are covered by the dedicated assembly and testing training system.
What site conditions should be reviewed?
Review the three-phase electrical supply, floor space, guarding, ventilation, emergency procedures, installation scope and instructor operating requirements before procurement.
Continue Exploring
Related Products
Compare the stated teaching roles below. Product connections, included accessories and software licenses are confirmed in the selected configuration.
